Empress Effects 10th Anniversary Edition Tremolo Guitar Effect Pedal

The Empress Tremolo is 10 Years old! We’re celebrating with a limited edition, 10th anniversary tremolo pedal. Only 250 of these pedals will be made, each with its serial number engraved on the front of the pedal.

Features

• Pristine Sound - The Empress Tap Tremolo2 Pedal has to be heard to be believed. It's whisper quiet and free from the "LFO throb" usually associated with tremolos. We dare anyone to find a better sounding tremolo.
• Waveform Selection - You can modulate your sound with three different waveforms. An asymmetrical tremolo was modeled after a '65 Fender Vibrolux (brown face) to give you the fullest tremolo sound possible. A square wave can be utilized if you're after a harder sound. And if you're looking for a more normal tremolo, you can use the triangle wave setting.
• Tap Tempo - The Empress Tap Tremolo2 Pedal averages your last four taps so it plays in sync with your music. You can also choose different tap to tremolo rate ratios. 1:1, 3:4, 1:2, 1:3 and 1:4 are available.
• Rhythms - Another exclusive feature. The Empress Trem will definitely do your run-of-the-mill tremolo sound to a tee. But you can also set it to play different rhythms. Check out the soundclips for examples.
• Gain - A problem with most tremolos on the market is that when they're engaged, you hear a noticeable drop in volume. The Empress Trem solves this by having a gain stage on the output. It's able to deliver up to 12dB of gain without adding any distortion to the signal.
• Presets - Save all your settings in up to 8 presets and recall with the touch of a button.
• True Bypass - The Empress Trem employs true bypass, so you can be sure that it's not affecting the signal when disengaged. Buffered bypass is also available if that's your thing.
• Advanced Configuration Menu - The Advanced configuration menu lets you configure how your tremolo works. Select from true or buffered bypass, 0-8 presets, MIDI configuration, Control port control (expression pedal, external tap, control voltage and MIDI) as well as which preset system to use, the ramp speed when switching between presets and more!
• Perfect Size - The enclosure measures approximately 4.5" by 3.5" by 1.5", which is delightfully small when considering all the features packed into this unit.

• Specifications

  Power Input Voltage	9 - 12 V DC (Negative tip)
  Power Input Connector	2.1mm barrel connector (Negative tip)
  Power Consumption	100mA
  Enclosure Material	Die Cast Aluminum
  Input connector	1/4" Jack
  Output connector	1/4" Jack
  Height (Enclosure only)	1.5"
  Height (including controls)	2"
  Length	3.5"
  Width	4.5"
  Input Impedance	1 Meg
  Output Impedance	330 Ohm
  Frequency Response (-3dB)	4Hz - 30kHz
  Input Headroom	+9.8dBu
  Output Headroom	+9.2dBu
  Distortion	0.40%
  Signal to Noise	107.7dBv