{"product_id":"walrus-audio-sloer-stereo-ambient-reverb","title":"Walrus Audio SLOER Stereo Ambient Reverb Blue Pedal","description":"\u003cp\u003eThe Slöer Stereo Ambient Reverb builds on our popular Slö lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.\u003cbr data-mce-fragment=\"1\"\u003eSave your favorite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain. The five-way rotary dial allows five different reverb modes-the three you know and love from the Slö: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003eCombine deep modulation, long washy trails, and an immersive stereo field to experience Slöer.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eALGORITHMS:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDARK –\u003c\/strong\u003e Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a\u003cbr data-mce-fragment=\"1\"\u003e-1 octave signal that feeds the reverb. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRISE –\u003c\/strong\u003e This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for\u003cbr data-mce-fragment=\"1\"\u003elonger rise times.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDREAM –\u003c\/strong\u003e Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set\u003cbr data-mce-fragment=\"1\"\u003e. X knob sets the depth of vibrato applied to the reverb trail.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRAIN –\u003c\/strong\u003e Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audible create an echo-like effect within your reverb. Use the Xcontrol to set the amount of diffusion of the delay taps. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Slöer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSINE –\u003c\/strong\u003e Smooth and even pitch up and down modulation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWARP –\u003c\/strong\u003e Asymmetric pitch up modulation similar to a warped record.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSINK –\u003c\/strong\u003e Asymmetric pitch down modulation for sinking detune similar to a Bigsby.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSQUARE –\u003c\/strong\u003e Symmetric pitch up and down modulation for stepped modulation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRANDOM –\u003c\/strong\u003e Uses sample and hold that picks new random values.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMOMENTARY FUNCTIONS:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBypass:\u003c\/strong\u003e When the switch is in the of f position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSustain:\u003c\/strong\u003e When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the “Dream” algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTRAILS MODE:\u003c\/strong\u003e\u003cbr\u003eThe Slöer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly\u003cbr\u003ecut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRESET SPILLOVER\u003c\/strong\u003e\u003cbr\u003eWhen scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe Slöer comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit OR a matte black finish with cream ink.\u003c\/li\u003e\n\u003cli\u003eThe die-cast enclosure’s exact size is 4.79” x 3.62” x 2.25” including knobs.\u003c\/li\u003e\n\u003cli\u003ePower requirements are 9VDC (100mA minimum).\u003c\/li\u003e\n\u003cli\u003eThe use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.\u003c\/li\u003e\n\u003cli\u003ePower supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":43823797371123,"sku":"20WAL041","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/2433\/files\/Sloer-front.jpg?v=1688321701","url":"https:\/\/www.truetonemusic.com\/products\/walrus-audio-sloer-stereo-ambient-reverb","provider":"Truetone Music","version":"1.0","type":"link"}