Crazy Tube Circuits Orama Fuzz Pedal
Orama (Greek for vision) is our vision in gain, uniting the unmistakable growl of classic British amplification with the thick, unrelenting saturation of a thundering fuzz. It’s designed to let players explore every shade between clarity and chaos, order and noise; from articulate crunch to earth-shaking sustain. Every element of Orama was designed to feel alive under your hands: dynamic, reactive, and expressive. Whether used as two separate voices or as one unified wall of sound, it delivers the power, response, and full spectrum of rock tone. It’s a dialogue between eras and genres.
The left, AMP section takes direct inspiration from a seminal British amplifier whose roots trace back to the late 1960s and early 1970s. Over the years, countless notable guitarists across styles have relied on that unmistakable amp voice. It delivers everything from bluesy breakup and Classic Rock crunch to Britpop sizzle. For many Heavy Rock, Desert, Stoner and Doom players, it remains the ultimate choice for its colossal headroom, thick low end, and overwhelming, room-shaking authority.
Orama captures the full sweep of that circuit’s gain, from clean and edge-of-breakup tones to thick, saturated drive, while preserving the raw immediacy and punch that made the original legendary. Inside, a JFET circuitry runs on 34 V DC, raised via an internal voltage boost from the incoming 9V DC power supply, delivering enormous headroom, dynamic range, and bass response that mirrors the authority of a full-powered amplifier.
One of the original amp’s defining features is a tone-shaping control that adjusts how bass and lower mids are fed into the gain stages, effectively changing the drive voicing and overall feel of the amp. This control is not subtle; each position produces a distinct tonal shift, from lean and biting to thick and saturated. Orama’s F.A.T. (Fatness Adjustment Tweak) control operates in the mirrored direction of the original amp’s circuit.
Another crucial element of the original circuit is a control that boosts upper harmonics gain and presence to help the amp cut through dense mixes. Orama’s H.F.D. (High Frequency Dynamics) mirrors this behavior, allowing players to add definition, bite, and clarity, especially useful when the gain control is set high and the tone grows heavier in the low and low-midrange territory. Increasing H.F.D. at higher gain settings restores top-end sparkle and ensures the sound remains articulate and balanced even in the thickest, most saturated tones.
The FUZZ section takes inspiration from a landmark design from the early boutique pedal era of the 90s. Its circuit is driven by power amplifier ICs rather than traditional transistor or diode clipping stages. This design gives the fuzz its distinctive voice: thick, powerful, and harmonically complex, yet capable of surprising smoothness and control. It delivers a full, amp-like roar that feels more like an overdriven output stage at the verge of explosion rather than a conventional fuzz circuit.
In Orama, this foundation has been fine-tuned to our own specifications for improved tonal balance and flexibility. Two distinct voicings, RAW and BURN, extend the range from vintage-inspired textures to high-gain saturation and sonic mayhem. The RAW mode offers an open, dynamic response with tight low end and clear mids, while BURN unleashes deeper bass and longer sustain for a heavier, molten character. Overall bass response has been slightly refined to make the circuit sit more naturally in a band mix without losing its signature thickness. The result is a more flexible, balanced fuzz that still retains the immense sustain and sheer mass of the source circuit.
Like its inspirations, Orama is not particularly polite! It carries the imperfections, the danger, and the beauty that define real rock tone. While the two sections can of course be combined for pure sonic mayhem, Orama was conceived so that each side could stand proudly on its own, complete, expressive, and powerful. Run each section independently for two complete tonal identities, or stack them for a united force of pure energy. When stacking both sections, or when using either at extreme settings, low-end buildup can cause sagging fuzz or (un)wanted blocking distortion which may be musical or excessive depending on context. Players chasing the full stoner/doom collapse can, of course, push these controls to their extremes for massive, blooming results. A passive effects loop between the sections gives you even greater routing freedom, making Orama as creative and flexible as it is powerful.
This is our vision in gain made real!
FULL FEATURE LIST:
All analog dual pedal: fuzz / amp-in-a-box.
Recreates classic rock and stoner / doom tones.
Right (FUZZ) side: a fine-tuned recreation of a fuzz pedal born in the early boutique pedal scene of the 90s, the Frantone Peachfuzz.
Controls: fuzz: adjusts intensity and saturation, from smooth to explosive
tone: shapes EQ, from dark and woolly to bright and cutting
volume: controls output level of the fuzz section
RAW/BURN toggle: RAW: tighter, lower-gain vintage fuzz | BURN: higher gain, more sustain and low-end
Le (AMP) side: JFET based circuit, running at internally boosted high voltage of 34V DC for true amp-like response and captures the full gain range and
harmonic complexity of the legendary Orange OR120.
Controls: gain: control the amount of amp drive / saturation, from clean to full saturation
F.A.T. (Fatness Adjustment Tweak): adjusts low-mid emphasis and gain character
Hz (Bass): low-frequency control
kHz (Treble): high-frequency control
H.F.D. (High Frequency Dynamics): adds upper harmonic content drive and presence
master: controls overall output level. Can be used as a boost / preamp
Independent operation of the FUZZ and AMP sections.
Click-less true bypass design via high quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top mounted jacks.
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Current consumption 82mA.
Rich “burnt orange” with a subtle bronze warmth, die-cast enclosure with color-coded lettering for the control section (black for the FUZZ section, white
for the AMP section).
Designed and hand-built in Athens, Greece.