Flattley Guitar Effect Pedals Platinum Series The Phoenix Stereo Analogue Flanger Guitar Pedal

“The Phoenix” is an analogue flanger with stereo outputs. The Phoenix has two delay chips and therefore two separate circuits. When the toggle switch is selected to “normal” only one delay chip is used but when the differential mode is selected the second delay chip is utilized in parallel but out of phase to the first delay chip. When the delay time is turned up you create amazingly deep smooth flanging tones. This is definitely an old school vintage style flanger with amazing deep creamy flanging tones and effects.

All Flattley “Platinum Range” pedals are hand processed in our Flattley paint shop. The bare aluminium enclosure is abraded prior to painting with the etch primer. The etch primer acts as a anti corrosive layer and allows the primer to bond to the enclosure ensuring a tough resilient paint finish.

Multiple coats of base coat primer are applied which are then lightly abraded to remove any blemishes or paint speckles prior to the application of the base colour. We apply several coats of base colour until an even coverage occurs and the base colour develops rich smooth depth. Metallic holographic chrome flake is then applied using a clear inter coat which adds that all important Flattley sparkle.

The pedal enclosure is now ready to be hydro dipped in its Flattley graphics. This is the process whereby the graphics are applied using water activated film, the residual PVA film is then washed off and the enclosure is then allowed to dry naturally.

Once dried the lacquer process begins. Each “Flattley Platinum” pedal has a minimum of three coats of lacquer which are all wet sanded between coats. Once the lacquer has hardened, it is then hand polished using three different grades of polishing compounds and it then has a final polish to achieve a high gloss finish using a wool finishing pad. This process gives the smooth deep lustre finish that is inherent in all Flattley Guitar and Bass effects pedals.